ESAB MultiPower 460 Pulse Manual de instrucciones descargar pdf (Pagina 24)

SECTION 1 DESCRIPTION

5. Lifting Bracket - Hanging Bail (PN 0558003047):

Mounts at the top of the wire feeder spool support. Enables you to mount the wire feeder overhead on a boom or

trolley system.

6. Spool Enclosure Kit (PN 0558002357):

Hinged cover and enclosure provides protection for spool of wire against dust and dirt.

7. Reel Assembly (PN 995570):

Reel slips over spindle to allow use of coiled wire.

8. Swivel Post (PN 36172):

Installs on power sources such as ESAB 353cv, 453cv MultiPower 460 and 460 Pulse, or 653cvcc and allows the wire

feeder to swivel freely.

9. Swivel Post w/Mounting Bracket (PN 34075):

Attaches to inverter cart (P/N 31700) or other at mounting surface and allows the feeder to swivel freely

10. Handle Kit (PN 0558002356)

Includes handle with rubber grip and mounting hardware.

11. Wheel Kit (PN 34324))

Makes it easy to roll wire feeder around job site Cart includes base, front swivel caster wheels, rear caster wheels

and mounting hardware.

12. Counterbalance Mini-Boom (PN 0458705881)

Mounts to the power source swivel post and reduces wire feeding problems caused by sharp bends in the gun

liner and cables by keeping the gun cable o the oor. Includes boom and mounting hardware. (requires Swivel

Post - P/N 36172)

13. Marathon Pack Inlet Guide (PN 0558002354)

Allows the secure connection of a Marathon Pack conduit/liner to the rear panel of the DuraDrive wire feeder.

Requires:

Quick Disconnect Adaptor Kit (QAC).....................................P/N 899F50

NOTE

A continuous water supply or re-circulator is required when using a water cooled MIG gun.

NOTE

The DuraDrive feeder is not compatible and cannot be used with the UltraPulse 450i Pendant.

NOTE

If the Trigger Lock option has been installed and set to the "ON" position, the trigger switch lever can be

released when the arc has been struck. Depress the trigger lever a second time to stop the arc. If the gun

is withdrawn from the workpiece during welding, the arc will be interrupted and wire feeding will stop

automatically.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 51 52

Sin comentarios

ESAB MultiPower 460 Pulse Manual de instrucciones Pagina 24