ESAB MultiPower 460 Pulse Manual de instrucciones descargar pdf (Pagina 16)

DESCRIPTION

SECTION 2

4. CONTACTOR "ON/OFF" SWITCH

This switch provides manual control of the welding contactor when the

PROCESS switch on the control panel is in the MIG position (CV welding).

An example of when to use this switch is when CV carbon arc gouging is

needed or an "Off the Arc" wire feeder with secondary contactor is operated

in the CV mode.

5. AUXILIARY 115 VAC RECEPTACLE

A 115 Vac receptacle is provided to supply power to accessories such as

a water cooler, heated CO

regulator, or small hand tools. The receptacle

is rated 115 Vac / 10 amps with a floating neutral.

6. 42VAC AND 115 VAC CIRCUIT BREAKER (CB1 & CB2)

These resetable 10 amp circuit breakers (CB1 & CB2) protect the 42 volt

wire feeder/control and 115 volt auxiliary receptacle circuitry against over

current. (Table 5-1 provides troubleshooting information).

E. OPTIONAL ACCESSORIES

1. REMOTE HAND CONTROL (PN - 0558002871)

This pendant (Figure 2-6) provides remote output control and a contactor

closure switch to close the contactor making the output terminals “hot”.

The PANEL/REMOTE switch on the MultiPower 460 control panel must be

placed in the REMOTE position when using this accessory. The pendant

has the capability to change weld processes as well as adapt to digital and

analog wire feeders.

2. TR-29 TRUCK KIT (PN - 37924)

This truck kit provides complete mobility of the power source. The kit

consists of front castors, rear cylinder rack and wheels, gas cylinder

bracket, cylinder chain, and pull handle.

3. SWIVEL MOUNT KIT (PN - 36172)

This kit allows the wire feeder to be placed on an insulated swivel post on

top of the power source. The feeder can freely rotate, relieving potential wire

feed problems caused by sharp bends in the gun cable while, at the same

time, increasing the radius of the working area.

4. PULSE MIG UPGRADE KIT (PN - 0558002671)

This kit adds pulse gas metal arc welding capability to the MultiPower 460

and includes and new control front panel.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Sin comentarios

ESAB MultiPower 460 Pulse Manual de instrucciones Pagina 16