search

ESAB MultiPower 460 Pulse Manual de instrucciones Pagina 17

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 60
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
    •
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 16
17
Figure 2-5. Multipower 460
Main Power
On/Off Switch
Output
Connections
Wire Feeder
Connector
Remote Pendant
Connection
Contactor On/Off
Switch
Circuit Breakers
CB1 & 2
Control Panel
115 Vac
10 Amps
Receptacle
short circuit frequency, fast reacting arc, to a lower short circuit frequency,
soft and less spattering arc as the dial is turned clockwise. The optimized arc
performance will vary depending on shielding gas, wire type and wire diameter.
The operator can adjust this control to optimize welding characteristics.
8. MODE SWITCH
This switch enables the Mig pulse or standard operation mode. When this
switch is in the PULSE position, the pulse parameters are determined by the
WIRE TYPE and WIRE DIAMETER position on the PULSE SELECTION
switches. Use the STANDARD position for CV MIG, TIG and STICK welding.
The Multipower 460 will default to minimum voltage if trying to TIG or STICK weld
in the PULSE position.
9. PULSE SELECTION SWITCHES
WIRE TYPE
Use this switch to select the WIRE TYPE installed on the wire feeder. The
position of this switch and the WIRE DIAMETER switch selects the pulse
parameters to be used during welding in the Mig pulse mode.
WIRE DIAMETER
Use this switch to select the WIRE DIAMETER installed on the wire feeder.
The position of this switch and the WIRE TYPE switch selects the pulse
parameters to be used during welding in the Mig pulse mode.
D. POWER SOURCE FRONT PANEL DESCRIPTION
(Refer to Figure 2-5)
1. POWER ON/OFF SWITCH & LAMP
The main power switch is located on the right front panel of the power source.
This switch energizes the main transformer, control circuitry and illuminates
the Power “ON” lamp. (Refer to Figure 2-1)
SECTION 2 DESCRIPTION
Vista de pagina 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 59 60

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Sistema De Soldadura ESAB MultiPower 460 Pulse
Sistema De Soldadura ESAB PowerCut-550 Manual de usuario   (5 paginas)
Sistema De Soldadura ESAB POWERCUT-1500 Especificaciones     (48 paginas)
Sistema De Soldadura ESAB PCM-875A Manual de instrucciones    (48 paginas)
Sistema De Soldadura ESAB ST-16 Manual de usuario   (2 paginas)
Sistema De Soldadura ESAB Origo Mig 502c Manual de usuario   (44 paginas)
Sistema De Soldadura ESAB PowerCut-550 Manual de instrucciones    (28 paginas)
Sistema De Soldadura ESAB ESP-50 Manual de instrucciones   (22 paginas)
Sistema De Soldadura ESAB POWERCUT-1250 Manual de instrucciones     (48 paginas)
Sistema De Soldadura ESAB POWERCUT-1500 Manual de servicio   (44 paginas)
Sistema De Soldadura ESAB MultiPower 460 Pulse Instrucciones de operaciones     (28 paginas)
Sistema De Soldadura ESAB MIGMASTER 250 Manual de instrucciones    (60 paginas)
  • Federal Aviation Administration Vertex Standardt Earthquake Sound Ultra electronics Eventide
  • Compaq Accesorios De Panel Plano AGFA No DeWalt Compresores de aire Sony Gimnasios para bebés y esteras de juego SMc Audio Equipo musical
  • Samsung SGH-P400 Bosch HBC33B550 Electrolux EUF1900AOW LG 50pj250 Whirlpool AZB 9682
  • Electrolux ESL94300LA Hoja informativa National Instruments Smart Camera Manual de usuario Hampton Bay YG188-WB Manual de instrucciones Emerson EWF2702 Manual de usuario