ESAB MultiPower 460 Pulse Manual de instrucciones descargar pdf (Pagina 28)

The preprogrammed wire types, wire diameters and shielding gases are

listed in Table 4-2.

The TRIM allows the operator to fine tune the pulse arc length and optimize the

welding. When the PROCESS switch is placed in the MIG position and the MIG

MODE switch is placed in the PULSE position, the Multipower 460PULSE is set

for CC over CC (constant current) pulse welding. The power source will output

open circuit voltage (OCV) when the Mig Gun trigger is depressed. The

Multipower 460PULSE provides a TRIM from either the wire feeder or power

source depending on the position of the PANEL/REMOTE switch characteris-

tics. The TRIM adjustment is calibrated such that the preprogrammed synergic

pulse data is approximately at the 12 o'clock position of the TRIM knob. The

operator should preset the voltage control on the wire feeder to the 12 o'clock

position and adjust for best arc characteristics.

The operator can change to STANDARD MIG (CV) by simply moving the MIG

MODE switch to the STANDARD position.

Table 4-2. Wire Types, Diameter and Shield Gases

SECTION 4 OPERATION

Material Type Diameters

Shielding Gas

(AWS Designation)

Carbon Steel

.035, .040, .045,

.052, .062

Ar - 5% CO2 (SG-AC-5)

Ar - 8% CO2 (SG-AC-8)

Ar - 10% CO2 (SG-AC-10)

Ar - 2% O2 (SG-AO-2)

Ar - 8% CO2 - 2% O2 (SG-ACO-8/2)

Stainless Steel

.035, .040, .045,

.062

Ar -2% CO2 (SG-AC-2)

Ar - 8% CO2 (SG-AC-8)

Ar - 2% O2 (SG-AO-2)

Ar - 8% CO2 - 2% O2 (SG-ACO-8/2)

Ar - He

4000 & 5000

Aluminum

.035, .040, 3/64,

.062

Ar ( SG-A)

Ar - He 25% (SG-AHe-25)

Ar - He 50% (SG-Ahe-50)

Metal Core

Carbon Steel

.035, .040, .045,

.052, .062

Ar - 5% CO2 (SG-AC-5)

Ar - 8% CO2 (SG-AC-8)

Ar - 10% CO2 (SG-AC-10)

Ar - 2% O2 (SG-AO-2)

Ar - 8% CO2 - 2% O2 (SG-ACO-8/2)

Metal Core

Stainless Steel

.045, .062

Ar - 2% CO2 (SG-AC-2)

Ar - 8% CO2 (SG-AC-8)

Ar - 1% CO2 (SG-AC-1)

Ar - He 50% - 2% CO2 (SG-AHeC-50/2)

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 59 60

Comentarios a estos manuales

Sin comentarios

ESAB MultiPower 460 Pulse Manual de instrucciones Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Sistema De Soldadura ESAB MultiPower 460 Pulse